Nexseal Plug is a dark, non-shrinking grout formulated to immediately stop flowing water through concrete cracks and holes in seconds. Using an advanced formulation Nexseal Plug hardens in excess of the concrete into which it has been placed to ensure your repairs stay where they are placed.

Recommended

• For stopping water flow for leaking cracks, holes and non-moving joints
• As part of the Nexseal Crack Repair System
• As part of the Nexseal 1000 surface applied system.
• As a seal stopping seepage around pipes and metal in concrete and masonry
• As an anchor for bolts and other metals

MIX RATIO

· 4 parts powder to 1 part water by volume (not weight)

APPLICATION

Nexseal Plug is mixed with water to a dry putty consistency. It can be applied to stop flowing water in concrete, brick and/or block. Nexseal Plug may be applied by hand using gloves to fill holes, cracks, and crevices. The plug should be manually worked and placed within the cavity pressing firmly until it is hard. Refer to Nexseal´s Existing Crack and Joint Repair – (A) Repairs with Flowing Water for full application instruction.

Mix only the enough product to be applied within 1 minute. Do not over work the material, as it is extremely quick setting.

PHYSICAL PROPERTIES

• Color dark gray
• Appearance powder
• Solids 100%
• Bulk density 1.25
• PH 13
• Compressive Strength 50 Mpa @ 7 days
• Shelf Life 2 years (when kept dry)

 

COVERAGE

1kg per 500 ml

SAFE HANDLING

Nexseal Plug possesses high alkalinity. It may cause skin and eye irritation. Use appropriate and suitable protective clothing and eye protection when mixing and or using Nexseal Plug.

Please refer to Manufacturer's Safety Data Sheets for health and safety information.

STORAGE

Store in dry location, opened bags or pails will deteriorate if subjected to moisture.

PACKAGING

20kg pails

Alternate packing may be made available upon request

• Technical Data Sheet
• MSDS Sheet